Round Bars

Stainless Steel 304 Threaded Rods, SS DIN 1.4301 / 1.4306 Forged Rods Suppliers, ASTM A479 SS Cold Drawn Bars Manufacturer, Stainless Steel 304L Hot Rolled Rods Manufacturing, SS 304 / 304L Rods Suppliers, Stainless Steel 304 / 304L Round Bars Manufacturer & Stockist In Mumbai, India.

Alpha Overseas(AOS) manufactures SS 304 / 304L Rod, Bars, Wire, Wire Mesh, which discovers its superior requirement in soft irritabilities and also can be utilized in unadorned scarring atmospheres. Our Grade 304L Wire Mesh may perhaps be combined by all normally utilized welding and brazing approaches together with oxyacetylene. These Alloy 304L Wires is discovered in a range of commercial areas, mainly in chemical manufacturing. The austenitic SS 304L Bars are well – thought – out to be the most weldable of soaring - alloy steels which can be fused by all union and confrontation fusing procedures. If intergranular erosion in heat exaggerated region may perhaps happen, it is recommended that these Stainless Steel 304L Rods to be used. Our 304 Stainless Steel Round Bars counterattacks distinctive erosion, in addition to, abstemiously rusting and plummeting atmospheres. This Grade 304 Wire Mesh has outstanding durability, even down to cryonegic high temperature which is well - defined as very low-slung heats.

Stainless Steel 316 Wire Rod, SS UNS S31603 Wire Mesh Suppliers, Stainless Steel 316 Wire Coil Manufacturing, SS 316L Bright Wire, Stainless Steel 316 /316L Filler Wires, SS 316 / 316L Wire Bobbin Suppliers, SS 316L Wire Supplier & Exporter In Mumbai India.

Alpha Overseas(AOS) supplies SS 316 / 316L Rod, Bars, Wire, Wire Mesh, which provides estrangement and tensile potency at elevated temperatures. Our 316L Stainless Steel Wire Mesh can also be designed from the hardened temper by deep and stamping drawing. These Alloy 316L Wires are as well both non - hardenable by heat action and can be voluntarily designed and strained. Our SS 316L Bars is outstanding in an array of atmospheric atmospheres and several eroding media - usually more resilient than Stainless Steel 304. These Stainless Steel 316L Rods contain nickel and chromium (at times manganese and nitrogen), designed around Stainless Steel 302 configuration of iron, 8 % of nickel and18 % of chromium. Our 316 Stainless Steel Round Bars as well provide superior creep, tensile potency and stress – to – rupture at high temperatures. This Grade 316 Wire Mesh is eagerly rolled or brake designed into a range of components for its uses in the manufacturing, transportation and architectural arenas.

• Item Code: 7222
• Delivery Time: Ready Stock
• Packaging Details: Loose

At Alpha Overseas, we keep an excellent supply of Aluminium 5083 Rod, Bar, and Wire in stock. Aluminium 5083 Rod, Bar, and Wire are ideally suited for the cryogenic market because they can withstand shallow temperatures without losing strength or other qualities.

What is Aluminium 5083?

Since this alloy is a part of the 5000 series, it also comprises the chemical composition of the silicon-magnesium-aluminum compound mixture. The most considerable portion of these three chemicals goes into the design of this alloy. It also contains titanium, zinc, copper, chromium, iron, manganese, and copper. For this reason, these bars have excellent corrosion, oxidation, and pitting resistance due to the presence of chromium compounds.

Some heat-treatable alloys and alloys cannot be heated. Magnesium is a component of the alloy that makes up the 5083 aluminum rod. Manganese and chromium are present in minuscule amounts. Even after welding, the material is still relatively strong.

Alpha Overseas is one of the top producers of high-quality items like today, including Aluminium 6061 Rod, Bar, and Wire. It has incredible resistance to corrosion, oxidation, and pitting thanks to the high chromium components. The iron components also benefit from increased hardness. Brinell hardness for grade 6061 often reaches 65 HB. Additionally, it provides a range of elongation of around 25%.

The highest melting point for this grade is 582 degrees Celsius. They have excellent thermal and electrical conduction properties. Additionally, it exhibits incredible thermal expansion and electrical resistance. They are offered a variety of surface finishes, including matt, black, polished, rough-turned, brilliant, etc. They may be made using the rolling and extrusion processes. Additionally, they can be used in forging and cladding. Both the manufacture of furniture and office equipment can use this product.

Alpha Overseas produces Aluminium 6063 Rod, Bar, and Wire, which is utilized in many industrial applications. For high-quality bars, we import premium raw materials from reputable dealers. Our inventory comes in various sizes, designations, standards, and forms, including round, rectangular, acorn, square, billet, and hex.

Additionally, Rods can be modified to meet the needs of the customers. With ready-to-ship inventory, we can also meet client demands for bulk quality products. Aluminium 6063 Bars tend to have enhanced corrosion resistance and abrasion resistance because of the finishing procedure. It performs well against pitting and stress corrosion cracking, even at high temperatures. Because of its capability, machinability, and weldability, it is famous for creating complicated structures. Elevated temperatures from this cause erosion. Additionally, Rod is resistant to reducing conditions like sulphides, chlorides, and acids encountered during chemical processing.

Alpha Overseas is a reputable business that provides a comprehensive selection of Aluminium 6082 Rod, Bar, and Wire. They provide this bar, which exhibits excellent corrosion resistance. It is also one of the metals that retain the reflective silvery quality in the form of powder, making it a crucial component of paints with a silver hue. These bars are utilized in several applications, so Alpha Overseas provides them in large quantities to those in need. The greatest technology and production techniques are employed to create these Aluminium 6082 Rod, Bar, and Wire without compromising the product's quality. They ensure the produced bars have superb surface quality and are polished effectively to prevent rusting.

Aluminium 6082-

The compound of average strength is aluminium alloy 6082, or AA6082. It exhibits excellent general corrosion resistance. Among the alloys in the 6000 class, it has the highest strength. A recognised structural alloy is AA 6082.

Alpha Overseas is one of the biggest Stainless Steel 316/316L Wires, Rods, Bar Manufacturers, Suppliers, Exporters, & Stockists. We supply a variety of wire drawing manufacturers across the world with stainless steel 316/316L wire rods of the highest quality. Due to our expertise in heat treatment, we are in a better position to produce and export wire rods with the needed mechanical rates and local and specific chemistry. Our wire rods are offered in various forms, including hot-rolled, annealed, and pickled, and range in thickness from 0.10 mm to 32 mm.

Stainless steel's 304 and 304L grades are more important than 316, 316L, and 316Ti wire rods. Sensitization and carbide precipitation at grain boundaries are unaffected by 316 stainless steel. We offer small and large-diameter cut-to-size stainless steel 316 wire rods. The Ultrasonic Tests, Mechanical Test Reports, and Chemical Test Reports are all exceeded by these 316/316L Stainless Steel Round Bars. The items in our 316/316L Stainless Steel Bars & Rods catalogue have remarkable corrosion resistance at higher temperatures and in acidic environments where chlorides are present.

Alpha Overseas offers solutions for numerous uses of inexpensively priced custom-designed Nickel 201 Rod, Bar, and Wire. In response to customer requests, we provide customized requirements. Our rods, bars, and wires are appropriate for use in higher stress and temperature conditions with their durability and low maintenance requirements. It is advised due to its adaptability and remarkable flexibility in every environment.

Nickel 201 Wire exhibits low electrical conductivity and is thought to resist various oxidation situations. Due to its effective heat resistance, it is safe at greater temperatures. It contains a passive coating that protects it from oxidation and other hostile environments. The composite Nickel 201 bars contain a significant amount of nickel, but the amounts of carbon and chromium are barely balanced. It offers a long lifespan, durability, resistance to wear and tear, high thermal stability, and a pitting-free look.

Alpha Overseas is a well-known manufacturer and exporter of Grade 2 Titanium Wire, which has a negative impact on ductility and has a low composition. Titanium Grade 2 Wire has largely replaced heavier, less practical, or less cost-effective materials in these and other engineering applications.

Regarding commercially pure titanium grades, Titanium Grade 2 Filler Wire is the best since it is the most malleable and ductile. Titanium Grade 2 Wire is frequently used in heat exchangers for various purposes, such as chemical processing, oil refinery, biomedical, and other industrial and commercial uses. Lightweight, remarkably resistant to corrosion, and able to tolerate very high temperatures are all characteristics of titanium grade 2.

Alpha Overseas is a Copper Nickel 70/30 Bars supplier, which offers tight restraints on mechanical features and contaminations by way of a required control value. Cupro-nickel 70/30 Bars are used in cooling seawater, ballast & bilge, sanitary, fire-fighting, pneumatic chiller & hydraulic systems, inert gas, etc. in ship repair and rebuilding. When nickel content is added, the colour of Cupro-nickel 70/30 Rods becomes more delicate, and the purity also increases.

Cu-Ni 70/30 Wire Mesh does not undergo repeated mechanical and thermal operations that would standardize the alloying components. Cu-Ni 70/30 Wires are ideally suited and ideal for the manufacturing and maritime industries because of the minimal amount of iron they contain, which provides an unexpected resistance to widespread erosion and SCC.

Alpha Overseas is a widely regarded company that manufactures and distributes outstanding grade Cu-Ni 90/10 Round Bars worldwide at the most competitive pricing. Before we deliver the client's order, our quality experts check the distinction between 90/10 and 70/30 bars. Cupro Nickel 90/10 Round Bars have a composition of 90% Copper and 10% Nickel, enhancing their strength, workability, formability, and weld-ability.

Cu-Ni 90/10 Round Bars of this grade were specifically created to have features like extraordinary high withstanding resistance to corrosion brought on by liquids, hardness, and temperature fluctuation resistance.

Copper Round BarASTM B62 Solid Copper Rod, Copper Flat Bar Price per Kg

Copper Busbar has good electric conductivity, corrosion resistance and high formability. Copper Round Bar are available in 1/4" to 1 3/4" diameter and meet ASTM B187 standards. Typical uses for Copper rods are for architectural, automotive, building and industrial projects. We are stocking distributor of Copper Hex Bar in various types & shapes. Check our latest price list of Copper Wire & Copper Rod. We have wide stock of ASTM B62 Copper Sqaure Bar & Hollow Bar. 

Duplex 2205 stainless steel is a high-performance grade of stainless steel that has a two-phase microstructure consisting of both austenitic and ferritic grains. It offers superior corrosion resistance, high strength, and good weldability compared to other grades of stainless steel.

A round bar made from Duplex 2205 stainless steel is a solid cylindrical piece of material with a diameter that can range from a few millimeters to several inches. It is often used in applications where high strength and excellent corrosion resistance are required, such as in marine engineering, chemical processing, and oil and gas production.

Duplex 2205 stainless steel round bar is available in various sizes and can be machined or welded using standard techniques. It is also known for its good formability and weldability, making it a versatile choice for many different applications.

Some common properties of Duplex 2205 stainless steel round bar include excellent corrosion resistance in harsh environments, high strength, and good ductility. Additionally, it has a high resistance to stress corrosion cracking and fatigue, which makes it an ideal choice for applications that are subject to high stress levels. It also has a high resistance to pitting and crevice corrosion, which is often a concern in chloride-rich environments.

Alpha Overseas has a large inventory of Copper Nickel 70/30 Wire. Under the supervision of industry professionals, premium quality copper is used to create the 70/30 copper nickel filler wire that is being supplied. Experts perform various tests on our CuNi 70/30 wire to ensure defect-free. Industries utilize this filler wire extensively when welding stainless steel and nickel alloy goods.

According to the customers' needs, we provide this filler wire in various diameters and other parameters. Copper nickel wires are commonly utilized in applications with maximum operating temperatures up to 600°C (1,110°F) as a medium to low resistance materials. Our selection of copper-nickel alloy and cupro-nickel alloy wires makes them perfect for various industrial applications.

Alpha Overseas is one of the oldest makers, suppliers, and distributors of self-shielding, flux-cored filler metal, Copper Nickel 90 / 10 Filler Wires. A larger-than-normal molten weld pool is made possible by the slag that fluxes produce. High deposition rates, though, are possible due to the size of the weld pool. Combining materials that are similar or different is possible using Cu-Ni 90/10 TIG welding. It is necessary to fill the groove, a space created to combine the materials, with a metal that has properties similar to those of the joined material. Filler material refers to the substance that is utilized to fill. The melting temperature should be comparable to the molten weld metal's melting point. It should have a different coefficient of expansion, given that it may be easily removed after cooling.

Alpha Overseas is a prominent manufacturer, exporter, supplier, and stockist of nickel alloy 200 filler wire in India. When corrosion resistance and steel characteristics are needed, nickel 200 filler wire is utilized. If the technical standard requires it, stainless steel wire must undergo heat treatment (solution annealing). Because of the high purity of the nickel, nickel 200 wire offers exceptional mechanical characteristics and flexibility. In addition to having good electrical and thermal conductivity and magnetostrictive qualities, it resists high temperatures and corrosion. Nickel 200 Welding Wire, or 99.5 percent of pure nickel wire, is composed of nickel. It is resilient to various corrosive conditions and has good mechanical qualities.